Accon Marine - Top-Mount Backing Plate for 209 Series Mooring Cleats

Browse By Category

Top-Mount Backing Plate for 209 Series Mooring Cleats

FEATURES

INSTALLATION

Place the template (backing plate) in the desired location. Make sure that there is adequate clearance for the Pop-Up® or Pull-Up mechanism below the deck.
Trace the cleat cut-out area and spot the small threaded hole. Do not spot the four mounting holes yet.
Cut out the cleat installation area.
Drill a 3/16" diameter hole for the #6 screw.
Place cleat in cut-out and spot the four mounting holes.
Remote the cleat and drill the four mounting holes.
Place the backing plate through the cut-out and install the #6 screw through the deck into the backing plate. Be careful not to drop the backing plate down into the hull. Do not overtighten the #6 screw.
Replace the cleat into the cut-out and install the four mounting screws through the cleat and deck into the backing plate.

Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 4.5" Pull-Up Cleat (209 Series)	209-4-TMP	n/a	Price: $15.72	Quantity:
Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 6" Pull-Up Cleat (209 Series)	209-6-TMP	n/a	Price: $31.26	Quantity:
Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 8" Pull-Up Cleat (209 Series)	209-8-TMP	n/a	Price: $32.79	Quantity:
Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 10" Pull-Up Cleat (209 Series)	209-10-TMP	n/a	Price: $47.13	Quantity: