Accon Marine - Top-Mount Backing Plate for Pop-Up® Cleats

Browse By Category

Top-Mount Backing Plate for Pop-Up® Cleats

FEATURES

INSTALLATION

Place the template (backing plate) in the desired location. Make sure that there is adequate clearance for the
Pop-Up® mechanism below the deck.
Trace the cleat cut-out area and spot the small threaded hole. Do not spot the four mounting holes yet.
Cut out the cleat installation area.
Drill a 3/16" diameter hole for the #6 screw.
Place cleat in cut-out and spot the four mounting holes.
Remove the cleat and drill the four mounting holes.
Place the backing plate through the cut-out and install the #6 screw through the deck into the backing plate.
Be careful not to drop the backing plate down into the hull. Do not over tighten the #6 screw.
Replace the cleat into the cut-out and install the four mounting screws through the cleat and deck into the backing plate.

Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 4.5" Pop-Up® Cleat	202-4-TMP	n/a	Price: $15.74	Quantity:
Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 6" Pop-Up® Cleat	202-6-TMP	n/a	Price: $30.97	Quantity:
Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 8" Pop-Up® Cleat	202-8-TMP	n/a	Price: $32.83	Quantity:
Product	SKU	Drawing	Price	Order
Top-Mount Backing Plate for 10" Pop-Up® Cleat	202-10-TMP	n/a	Price: $47.13	Quantity: